Product News
Short answer: Where a wedge log splitter carries a CE mark and is fitted with a two-hand control device, EN 609-1 requires that device to be the only designated control that runs the splitting stroke. Both hands must initiate the stroke, and releasing either hand stops it. The machine does not keep
2026/10/16 09:04
Short answerMatch the splitter to the round you actually handle, not to the biggest log on the property. On our range: 8T electric for clean rounds up to about 40 cm, 15T horizontal/vertical for mixed firewood up to roughly 50 cm, 25T for heavy rounds you cannot lift, and 50T for large hardwood
2026/10/15 09:10
A log splitter with a 90° rotating beam lets one machine work in two positions: vertical, with the round sitting on the ground so nobody has to lift it, and horizontal, with the log on the beam for a faster, repeatable cycle. Choose vertical for heavy rounds you cannot lift by hand, and horizontal
2026/10/14 09:07
A commercial sawmill holds 0.3–0.5 mm board thickness tolerance when the mill head travels on a stable, hardened datum and the blade cannot wander between cuts. Tolerance is not one feature — it is the sum of the rail, the guide blocks, the tensioning system and the dust control around them.Where
2026/10/13 09:04
Short answer: a 58–63 HRC track does not make boards accurate on its own. It stops the rail surface from deforming under the weight of the saw head and the log, so the head always travels on a stable datum — and that is what lets a commercial sawmill hold finished board thickness inside 0.3–0.5 mm.
2026/10/12 09:03
Short answer: Sawmill blades dull early for five controllable reasons - contaminated bark, poor blade cooling, wrong or uneven blade tension, worn guide blocks, and feed speed that work-hardens the tooth tips. Bark contamination is the largest single cause in the field, because grit and stones
2026/10/09 18:33
For many firewood businesses, a chainsaw and log splitter are a practical way to get started. The equipment is relatively simple and can be enough for small-scale production.As orders grow, however, cutting every log with a chainsaw, moving heavy rounds and handling finished firewood can require a
2026/08/14 14:49
IntroductionFor anyone entering the commercial firewood business — or scaling an existing operation — the term "firewood processor" appears early and often. It is the central piece of equipment in any production-scale firewood operation. Yet for first-time buyers, the distinction between a firewood
2026/08/07 11:15
Introduction: Why Splitting Force Alone Does Not Define a Commercial MachineFor commercial firewood producers, forestry contractors, and large-scale heating fuel businesses, machine selection is a capital decision — not a catalog choice. The most common mistake buyers make is selecting a processor
2026/07/11 14:23
Earlier this year, we had the pleasure of working with a customer from Germany who was looking for a reliable, high-performance portable sawmill to support his growing wood processing business. After conducting extensive research and comparing different manufacturers, he came across Shandong JIERUI
2025/10/25 17:15
Earlier this year, a Canadian lumber company specializing in custom hardwood products was looking to upgrade its production line. The company had been using traditional manual edging methods, which were not only time-consuming but also resulted in inconsistent board dimensions and a considerable
2025/08/21 17:34
In Cameroon, central Africa, there is a timber merchant named Emmanuel who has made a living by logging for generations. He runs a small family owned wood processing factory, where manual sawing is inefficient, time-consuming, and labor-intensive. Faced with constantly growing customer orders, he
2025/06/28 11:32
