JERRY 15T Log Splitter vs Split-Fire 2265: Two-Way Wedge and Log Size

2026/11/17 09:30

Short answer: the two machines use the word "two-way" for different things. Split-Fire's 2265 is a horizontal splitter whose wedge splits on both the extend and the return stroke, published at 3 seconds per split and 18 tons. JERRY's 15T is a 15-ton horizontal/vertical unit that rotates 90 degrees, with a 520 mm stroke and a 2-way or 4-way wedge that splits a round into 2 or 4 pieces per stroke, published at a 15 second cycle.

The word "two-way" means two different things

This is the first thing to settle before comparing numbers, because the two designs solve different problems.

On the Split-Fire 2265, "2-way" describes the direction of travel. The cylinder pushes the log through a fixed wedge on the extend stroke, then the wedge on the return stroke meets the next round. Split-Fire publishes the result as "3 seconds per split" and "6 seconds extend and return stroke" on the model page. There is no return-stroke dead time to wait through, which is the reason the company frames cycle time the way it does.

On the JERRY 15T, "2-way" and "4-way" describe the wedge: a 2-way wedge turns one round into two pieces per stroke, a 4-way wedge turns it into four. The ram travels in one direction only. The published cycle time is 15 seconds for the full extend and return.

Both descriptions are accurate. They are not measuring the same event, so a 3 second figure and a 15 second figure should not be read as a like-for-like ratio without checking what each one covers.

Published specification comparison

ItemJERRY 15TSplit-Fire 2265Split-Fire 3165V
Splitting force15 ton18 ton15 ton
Splitting directionHorizontal and vertical, 90 degree rotateHorizontalVertical
Wedge2-way or 4-way (pieces per stroke)Fixed 2-way (splits on extend and return)Vertical wedge, splits downward
Cycle time as published15 s full cycle3 s per split; 6 s extend and return4.5 s; 3.5 s with high-flow kit
Stroke520 mm (20.5 in), customizable24 in (610 mm)20 in (508 mm)
Cylinder70 mm bore3 in x 24 in3.5 in x 20 in
EngineRuntong 180 cc air-cooled 4-stroke, OHV, electric start plus recoilLoncin G200FA standard; Honda GX200 optional; 120 V electric motor optionalHonda GX200 standard; Honda GX270 optional for high flow
PumpCBT1/4.2, two-stage11 GPM low pressure / 2.7 GPM high pressure11 GPM low pressure / 2.7 GPM high pressure
Hydraulic reservoir5 to 6.5 L of 46# oil12 L47 L (12.5 gal)
Working pressure16 to 22 MPaNot published on the model pageNot published on the model page
Bed widthNot published as a single figure; beam length 1430 mm overall19 in (483 mm)44 in (1118 mm)
Knife heightNot published as a single figure9 in (229 mm)11 in (279 mm)
Weight125 kg net / 145 kg gross (276 lb / 320 lb)365 lb (166 kg)950 lb (431 kg)
Overall size1430 x 520 x 1160 mm76 L x 39 W x 37 H in58 L x 48 W x 65 H in
Tires4.1-3.5-44.80 x 820 x 4 in
HitchNo tow rating published; two-wheel frame with stand2 in ball coupler2 in ball coupler
Log lifter optionNot published as a factory optionHydraulic, 250 lb capacity, optionalHydraulic, 450 lb capacity, optional
Controls40 L three-position manual valveLever valveKnee control standard; hand control optional
List price as publishedQuoted on request by configurationUSD 2,758.00USD 7,125.00
Certification stated on pageCE; EPA and EU Stage V available for the petrol engineNot stated on the model page reviewedNot stated on the model page reviewed

JERRY 15T figures from the JERRY product page on forest-machinery.com, November 2026. Split-Fire 2265 and 3165V figures as published by the Split-Fire official site (split-fire.com), November 2026. Split-Fire prices are list prices as displayed on the build-and-price page for each model, subject to change and to destination, freight and tax. Dimensions in inches are the manufacturer's published units; metric values in brackets are direct conversions.

What the two-way wedge changes in daily work

A splitter's real hourly output is decided by how much time the operator spends waiting. On a single-direction machine, every round carries a return stroke. On the 2265, the return stroke is productive, so the same cylinder travel produces a second split. That is a mechanical design difference, and it is the reason the 2265 can publish 3 seconds per split without a faster pump than the 3165V, which uses the same 11 GPM / 2.7 GPM two-stage pump.

The trade-off sits in the wedge. A fixed two-way wedge on a horizontal beam splits along one plane. If a round needs quartering, it goes through twice, or the operator adds a 4-way wedge if the model supports one. On the JERRY 15T the wedge is the variable: a 4-way wedge quarters a round in a single pass, which shortens the handling time on clean, straight-grained rounds and on softwood.

Neither arrangement removes the need to lift rounds onto the beam. That is why both brands sell a log lifter as an option, and why the lifter rating matters more than most buyers expect: Split-Fire lists 250 lb on the 2265 and 450 lb on the 3165V.

Log size: stroke, bed and the vertical position

Log length is set by stroke: 24 in on the 2265, 20 in on the 3165V, 520 mm (20.5 in) on the JERRY 15T. The JERRY figure is listed as customizable, which matters for markets where firewood is cut to 500 mm or 600 mm rather than to 16 in or 24 in.

Log diameter is a different constraint, and it is the one that decides whether a machine is comfortable or miserable on a given pile. None of the three model pages publishes a maximum log diameter as a single number, so it is not compared here. What the pages do publish is the geometry that sets the practical limit:

  • Vertical position. The JERRY 15T rotates 90 degrees so the beam stands upright and a heavy round can be rolled to the wedge instead of lifted. The 3165V is a vertical machine by design, with a 44 in bed width and a 35.5 in bed height. The 2265 is horizontal only, with a 28 in bed height.

  • Wedge height. 9 in on the 2265 and 11 in on the 3165V; the JERRY 15T wedge is not published as a single height figure.

  • Bed width. 19 in horizontal working width on the 2265 against 44 in of table on the 3165V, which is what allows large rounds to sit stable in the vertical position.

For a buyer splitting mostly 30 to 50 cm softwood and mixed hardwood at a domestic or small-farm scale, the horizontal/vertical combination covers both cases with one machine. For a producer running a steady diet of large hardwood rounds, a dedicated vertical machine with a wide table and a high-capacity lifter removes more handling than any wedge change.

Throughput arithmetic, stated plainly

The arithmetic ceiling is easy to calculate and easy to misread. With continuous feeding and no handling time:

  • 2265 at 3 s per split: 20 splits per minute, 1,200 splits per hour.

  • 3165V at 4.5 s per cycle: 13.3 cycles per minute, 800 cycles per hour.

  • JERRY 15T at 15 s per cycle: 4 cycles per minute, 240 cycles per hour.

These are ceilings, not measured output. Real output falls once rounds are lifted, positioned and cleared, and it falls further when a round has to be re-split. The figures are useful for one purpose only: they show how much of the working hour is decided by the machine and how much by the log pile in front of it. A 4-way wedge on the JERRY 15T changes pieces per cycle, not cycles per hour, so the correct comparison is pieces per hour at a given log size, which depends on the wood.

Weight, towing and freight

At 125 kg net, the JERRY 15T sits in a different shipping class from the 2265 at 166 kg and the 3165V at 431 kg. For a dealer or a rental fleet, that difference shows up in three places: how many units fit in a container, whether a light trailer or a small utility vehicle can move the machine, and whether one person can reposition it on site.

Tire and hitch specification follow the same pattern. The 2265 uses 4.80 x 8 tires on a 2 in ball coupler and publishes a road-towable configuration; the 3165V uses 20 x 4 in tires and publishes highway towing up to 65 mph with heavy-duty hubs; the JERRY 15T uses 4.1-3.5-4 wheels on a two-wheel frame with a stand, and no highway tow rating is published for it, so it is positioned for yard and site movement.

Where each machine fits

Working patternMachine the specification points toReason
Firewood sold by volume, one operator, continuous splitting of prepared roundsSplit-Fire 2265 or 3165V3 s per split and 4.5 s per cycle are built for volume; 2265 keeps the return stroke productive
Mixed log sizes, including rounds too heavy to lift repeatedlyJERRY 15T or 3165VBoth offer a vertical working position; 3165V adds a 44 in table and a 450 lb lifter
Dealer or rental fleet needing compact freight and low unit weightJERRY 15T125 kg net, 1430 x 520 x 1160 mm, 1 set minimum order, mixed models in one container
Quartering clean softwood in one passJERRY 15T with 4-way wedge4 pieces per stroke instead of 2; no second pass for straight-grained rounds
High-volume hardwood with frequent re-splitsSplit-Fire 3165V with high-flow and log lifter47 L reservoir, 450 lb lifter, 3.5 s cycle with the high-flow engine option

What is not published, and why it is not in the table

Three dimensions were dropped rather than estimated:

  • Maximum log diameter. Not published as a number on the Split-Fire 2265 or 3165V model pages, and not published as a single figure for the JERRY 15T. Buyers should ask for the figure against the wood they actually cut.

  • CE, EPA and Stage V status for the Split-Fire models. Not stated on the pages reviewed, so no compliance comparison is made. JERRY states CE on the 15T and offers EPA and EU Stage V on the petrol engine.

  • Measured hourly output. None of the three manufacturers publishes a cord-per-hour figure for these models on the pages reviewed, so no output claim is repeated here.

Certification and trade terms on the JERRY side

The 15T leaves the factory with CE marking, and the petrol engine can be supplied to EPA or EU Stage V specification. Production runs under a TÜV Rheinland factory audit, and the company holds Verified Custom Manufacturer status on Alibaba.com. Minimum order quantity is 1 set, so a single unit can be ordered as a sample before a container programme. Shipment is from Qingdao, under FOB, CFR, CIF or EXW terms, and the factory is in Zibo, Shandong.

Frequently asked questions

Does the JERRY 15T split on both strokes like the Split-Fire 2265?

No. The JERRY 15T splits on the extend stroke only, in one direction. Its "2-way" and "4-way" refer to how many pieces one round becomes per stroke, not to splitting in two directions. The Split-Fire 2265's "2-way" refers to splitting on both the extend and return strokes.

Is a 15 second cycle time comparable with a 3 second figure?

Only after checking what each figure covers. Split-Fire publishes 3 seconds per split and 6 seconds extend and return for the 2265, because the return stroke also splits. JERRY publishes 15 seconds for the full extend and return of the 15T. The 2265 figure describes one productive stroke, the JERRY figure describes a complete cycle, so the two numbers are not measuring the same interval.

Can the JERRY 15T split logs that are too heavy to lift?

The 15T rotates 90 degrees to a vertical position, so a heavy round can be rolled to the wedge and split downward instead of being lifted onto a horizontal beam. The machine is supplied with a 2-way or 4-way wedge depending on the order. For repeated lifting of rounds above roughly 100 kg, a machine with a rated hydraulic log lifter is the more practical choice.

What is the minimum order and how is it shipped?

One set. Units ship from Qingdao under FOB, CFR, CIF or EXW. The 15T measures 1430 x 520 x 1160 mm and weighs 125 kg net, 145 kg gross, which allows several units to be consolidated with other forestry machinery in one container.

Which certifications come with the machine?

CE marking on the machine, with the petrol engine available to EPA or EU Stage V specification. Factory production is covered by a TÜV Rheinland audit and the supplier holds Verified Custom Manufacturer status. Certificates are issued with the shipping documents, and buyers who need the certificate numbers for customs or tender files can request them with the order.

Key facts

  • JERRY 15T: 15 ton, horizontal and vertical with 90 degree rotate, 520 mm stroke (customizable), 15 s full cycle, 2-way or 4-way wedge.

  • JERRY 15T weight and size: 125 kg net, 145 kg gross, 1430 x 520 x 1160 mm, 4.1-3.5-4 tires.

  • Split-Fire 2265: 18 ton, horizontal, fixed two-way wedge, 24 in stroke, 3 s per split, 6 s extend and return, 365 lb, USD 2,758.00 list as published.

  • Split-Fire 3165V: 15 ton, vertical, 20 in stroke, 4.5 s cycle, 950 lb, USD 7,125.00 list as published.

  • JERRY trade terms: MOQ 1 set, Qingdao port, FOB / CFR / CIF / EXW, factory in Zibo, Shandong.

  • Certification: CE; EPA and EU Stage V available on the petrol engine; TÜV Rheinland factory audit; Verified Custom Manufacturer.

Related reading

Split-Fire is a trademark of its respective owner. Model names and published specifications are cited for identification and comparison only. JERRY is a brand of Shandong Jierui Machinery Equipment Co., Ltd.

Talk to us about your log size

Tell us the species, the typical round diameter and the length you cut to, and we will confirm which wedge and stroke configuration fits, together with the certificate set for your market. Write to jerry@jerry-sawmill.com or visit forest-machinery.com.

Related Products