JERRY JR1000 vs Frontier OS31: Track Length, Cut Width and Engine Options

2026/11/22 09:30

Short answer: the JERRY JR1000 and the Frontier OS31 sit in different portable-sawmill classes. Frontier publishes a 31 in (79 cm) log diameter, 23 in (59 cm) width of cut and 14 ft (4.3 m) track. JERRY publishes 105 cm (41 in) log diameter, a 4 m track and 11 kW electric, gasoline or diesel power.

Published specification, side by side

SpecificationJERRY JR1000Frontier OS31
Maximum log diameter105 cm (41 in)31 in (79 cm)
Width of cutNot published23 in (59 cm)
Depth of cutNot published7.25 in (18 cm)
Maximum log length per setup3.5 m11 ft (3.4 m)
Track length4 m14 ft (4.3 m); 7 ft (2.1 m) extension available
Power11 kW (27 hp) motor; electricity, gasoline or diesel13.5 hp (420 cc) petrol, recoil start; 14 hp (429 cc) petrol, electric start
Supply voltage, electric version380 VNot applicable (petrol only)
Blade4200 × 35 × 0.9 mm144 in × 1.25 in (3660 × 32 mm) SabreTooth
Bandwheel500 mm19 in (48 cm) cast iron
Head lift and travelMotorised lift, power travelAuto-locking sawhead, manual crank (1 turn = 1 in of blade height)
Safe cutting speed4 m/minNot published
Weight770 kgNot published
Packing size2.1 × 1 × 1.76 mNot published
Warranty1 year1 year consumer; engine warranty through the engine maker (2 years Briggs, 3 years Kohler)
PriceQuoted per configuration, FOB QingdaoUS$5,287 list; US$3,965.25 promotional price shown 22 November 2026 (list price, subject to change)

JERRY figures: forest-machinery.com portable sawmill specification table, November 2026. Frontier figures: specification as published by Frontier Sawmills official site (frontiersawmills.com/products/frontier-os31), November 2026. Promotional pricing on that page is time-limited and is quoted here only as published on the date above.

JERRY portable band sawmill sawhead with motor, blade guard and water tank in the assembly workshop

Track length: a fixed 4 m rail against 14 ft plus bolt-on extensions

Track length decides the longest log you can saw without re-clamping, so it is the first number to check against the timber you actually own.

The JR1000 is published with a 4 m track and a maximum sawing length of 3.5 m per setup. The rail is a double-layer section with adjustable log supports and anti-collision stops at the ends of travel. A 3.5 m cut covers two 1.65 m lengths plus trim, which is the common case for pallet stock, fencing and barn lumber.

The OS31 is published with a 14 ft (4.3 m) track, an 11 ft (3.4 m) log length, and an optional 7 ft (2.1 m) bed extension. Frontier states that several extensions can be fitted in a stationary configuration to cut logs of any length, and that one 7 ft extension can be combined with the mobility sub-frame when the mill is towed.

If your logs routinely run past 3.5 m, ask each supplier three questions before ordering: how many extensions are needed for your longest log, whether each extension includes its own support jacks, and what re-levelling procedure is required after a joint is added. Those answers change the real cutting length more than the headline track figure does.

Width of cut: 23 in published by Frontier, not published by JERRY

Log diameter and width of cut are different limits, and buyers routinely confuse them. Log diameter is the largest round the mill accepts; width of cut is the widest board the blade can pass through between the guides.

Frontier publishes 23 in (59 cm) of width of cut and 7.25 in (18 cm) of depth of cut for the OS31. Those two numbers set the widest slab and the thickest beam the mill can produce in one pass.

JERRY does not publish a width-of-cut figure for the JR1000 in the JR specification table, so this article does not estimate one. In practice the limit is set by the spacing of the blade guides and by the log dogs, and it is confirmed per order. Ask JERRY for a cutting diagram with the quoted configuration: the diagram states the maximum board width and the maximum depth in writing, which is what a buyer needs when the job is wide slabs rather than square-edged lumber.

Engine options: three power sources against two petrol choices

The JR1000 is published with an 11 kW (27 hp) motor and three power sources: electricity, gasoline or diesel. The electric version is listed at 380 V; head lift and head travel are motorised on the JR series, so the operator sets depth and drives the carriage from the control panel.

The OS31 is published with two petrol engines: a 13.5 hp (420 cc) Briggs recoil-start unit and a 14 hp (429 cc) Kohler electric-start unit. Blade engagement is through a centrifugal clutch. Frontier does not publish a diesel or mains-electric option for this model on the page consulted.

The choice is usually made by the site, not by the engine. A fixed yard with a 380 V three-phase supply can run the electric JR1000 and remove fuel handling entirely. A site with no power, or one where diesel is easier to buy than petrol, points to the JR1000 gasoline or diesel version. A towable mill working out of a pickup on scattered lots is the case the OS31 is built around, and its electric-start engine option removes pull-starting from the routine.

Log diameter class: 41 in against 31 in

The two mills are not in the same class on log size. The JR1000 is published for logs up to 105 cm (41 in); the OS31 is published for logs up to 31 in (79 cm).

That gap decides the job before any other specification matters. A 36 in hardwood butt fits the JR1000 as published and exceeds the OS31 published maximum, so it would need to be reduced first. If most of your timber is below 30 in, both mills cover it and the decision moves back to track length, power source and transport.

Blade, bandwheel and cutting speed

The JR1000 runs a 4200 × 35 × 0.9 mm blade on 500 mm bandwheels, with a published safe cutting speed of 4 m/min. The OS31 runs a 144 in × 1.25 in (3660 × 32 mm) SabreTooth blade on 19 in (48 cm) cast-iron bandwheels; Frontier publishes the blade length and width but not the blade thickness or a cutting-speed figure.

Blade length and bandwheel diameter set how much blade is in the cut at once and how the blade behaves around the wheel. A longer blade carries more teeth through the log and needs more tension to stay stable; a larger wheel reduces the bending cycle a blade sees per revolution. Both sheets publish enough to order consumables correctly, which is the practical test: blade length, blade width and wheel diameter are the three numbers a buyer re-orders against.

Weight, packing and container loading

The JR1000 is published at 770 kg, with a packing size of 2.1 × 1 × 1.76 m and an assembled footprint of 4 × 2.5 × 1.8 m. Those figures are what a freight forwarder needs to quote ocean freight and to plan a container load; JERRY quotes the loading count per 40 ft HC container against the ordered configuration.

Frontier does not publish the OS31 net weight, shipping weight or packing dimensions on the product page consulted. Frontier sells through flat-rate shipping in North America and lists a mobility towing kit with 12 in wheels, a removable drawbar and six support jacks as an option. A buyer exporting the OS31 outside that market should request gross weight and crate dimensions in writing before booking freight, because the shipping class and the lifting plan both depend on them.

JERRY trailer-mounted portable band sawmill with log deck, support jacks and towing drawbar on a concrete apron

Warranty and support, as published

JERRY publishes a 1 year warranty on the JR series, with spare parts and blade supplied from the factory in Zibo, Shandong. Machines ship with CE documentation, the factory holds a TÜV Rheinland audit and Verified Custom Manufacturer status, and the minimum order is 1 set.

Frontier publishes a 1 year consumer warranty plus a 30 day money-back return window, with the engine covered directly by the engine manufacturer for 2 years (Briggs) or 3 years (Kohler). Consumables such as blades, belts, bearings and clutches are excluded from the machine warranty on their published terms.

Both are ordinary commercial warranties for this class. The practical difference for a buyer outside North America is where the parts ship from and how a claim is handled across a border; ask for the spare-parts list with prices before ordering, not after the first breakdown.

Which mill suits which job

The JR1000 fits a fixed or semi-fixed yard with a 380 V supply or reliable fuel delivery, logs up to 105 cm, and a cutting programme built around 3.5 m lengths. It also fits buyers who want one power platform (electric, gasoline or diesel) across a small fleet.

The OS31 fits a woodland owner or smallholding moving between sites with logs under 31 in, where the mill is towed behind a vehicle and set up on the landing. Its published 23 in width of cut and 7.25 in depth of cut suit dimension lumber and narrower slabs.

Neither machine is a production line. If daily output matters more than mobility, the commercial range with hydraulic log handling is the correct comparison; the JR80 against the Norwood LumberPro HD36v2 covers that step up, and the CNC sawmill comparison covers the fully automated class.

What neither published sheet answers

QuestionStatus on the published sheetsHow to get the number
JERRY JR1000 width of cut and depth of cutNot publishedCutting diagram issued with the quotation
Frontier OS31 net weight and packing sizeNot publishedRequest gross weight and crate dimensions from the supplier
Frontier OS31 cutting speedNot publishedRequest the operator manual feed-rate table
Frontier OS31 CE, EPA or Stage V statusNot publishedAsk the manufacturer for the declaration that applies to your destination
JERRY JR1000 hydraulic log handlingNot on the JR1000 sheet; hydraulic mills are listed separatelyAsk for the hydraulic model sheet if log loading is required

Frequently asked questions

Is the JERRY JR1000 a 41-inch sawmill?

Yes. JERRY publishes a maximum log cutting diameter of 105 cm for the JR1000, which is 41 in. The maximum sawing length per setup is 3.5 m on a 4 m track.

Can the Frontier OS31 cut a 36-inch log?

No. Frontier publishes a 31 in (79 cm) maximum log diameter for the OS31, so a 36 in butt exceeds the published capacity and has to be reduced before milling.

Does the JR1000 need a three-phase supply?

Only the electric version. JERRY lists 380 V for the JR1000 electric configuration and also offers gasoline and diesel power for sites without a three-phase supply.

Which mill produces the wider board?

Frontier publishes 23 in (59 cm) of width of cut for the OS31. JERRY does not publish a width-of-cut figure for the JR1000, so the value has to come from the cutting diagram issued with the quotation rather than from an estimate.

Are the two prices directly comparable?

Not directly. Frontier publishes a US$5,287 list price for the OS31, with a US$3,965.25 promotional price shown on 22 November 2026. JERRY quotes the JR1000 per configuration, FOB Qingdao, so the comparison only becomes real once the power source, track configuration and shipping terms are fixed on both sides.

Key facts

  • JERRY JR1000: 105 cm (41 in) log diameter, 3.5 m cut on a 4 m track, 11 kW (27 hp) motor, electricity / gasoline / diesel, 4200 × 35 × 0.9 mm blade, 770 kg, 1 year warranty.

  • Frontier OS31: 31 in (79 cm) log diameter, 23 in (59 cm) width of cut, 7.25 in (18 cm) depth of cut, 14 ft (4.3 m) track with 7 ft extension option, 13.5 to 14 hp petrol, 144 in SabreTooth blade, US$5,287 list price.

  • Certification and factory: CE documentation, TÜV Rheinland factory audit, Verified Custom Manufacturer, factory in Zibo, Shandong.

  • Trade terms: MOQ 1 set, FOB / CFR / CIF / EXW, shipment from Qingdao.

  • Customisation: machine colour and logo can be specified on the JR series.

Next step

Send the log diameter, the longest length you need to cut and the power available on site, and JERRY will return a configuration with the cutting diagram, the container loading count and an FOB Qingdao price. The same message can include a comparison against the JR series specification table so the track length and power source are fixed before the quotation is issued.

Related reading on this site: JERRY vs the Wood-Mizer LT15 and JERRY vs the Woodland Mills HM126MAX.

Email: jerry@jerry-sawmill.com
Website: forest-machinery.com

Related Products